Scanner Configuration – Seuic AutoID 9

Overview

This guide explains how to configure the Seuic AutoID 9 scanner to work with the StoreFeeder WMS app. These instructions may also apply to other Seuic models.

Configuring the scanner

1. Open Scan tool and go to Settings.

   

2. Select Developer at the bottom of the screen and enter the password 888888.

   

3. Set the broadcast name to:

   com.sf.barcode.action

4. Click Save.

No further changes are needed on the device.

Completing the setup in the app

Open the StoreFeeder WMS app and go to Menu > Settings > On Device Scanner Configuration > I have updated the settings.

Tap I'm ready to scan and scan the barcode 12345678. A success message confirms the configuration is working.